- measures rotation speed and engine hours with the option to activate counting of engine hours at the certain rotation speed you have set
- set the limit values at two levels (Warning and Alarm) for the measured rotation speed
- several separate stopwatches with the instructor/student option - suitable for more than one user or for air schools, where the student can be selected and the time will be measured only against his/her name
- password for locking the starter or the magnetos
- always be informed on the rotation speed reaching the limits, which could result in engine damage
- download from the RPM Meter at any time the flight diary with date, flight times, information about the crew and your local time
Basic functions:
- display immediately the maximum reached rotation speed etc. by pressing the external button
- using your PC, download at any time the history of the measured rotation speed from the RPM Meter
- connect your RPM Meter to the output of the signalisation unit, which will warn you of the exceeded rotation speed limits
- connect your RPM Meter with the Intercom using the iFamily® Bus and gain the option of having a voice alert of the exceeded limits
- you can at any time download the latest version of the firmware to your RPM Meter, thereby always having the latest functions we prepare for you
Other functions:
- designed for all types of engine
- incorporates the "real time and date" circuit for the reverse analysis of the measured values and detecting the person guilty of exceeding some of the set limits
- rotation speed can be measured without the necessity of installing a sensor, e.g. by connecting to the ignition unit or external sensor
- incorporates inputs for the low and high alternating current and direct-current positive pulses
- incorporates two inputs for connecting with the ignition switches for the function of detecting the low rotation speed
- high-precision measurement
- simple two-button control using the nav-menu
- history of the measured values with use of the SchecK® method
- user-programmable external button for the quick selection of any function
Technical parameters:
- voltage: 10.0 to 32.0 Volts
- backlights internal or external: 5V, 12V or 24V
- current consumption: 50 to 250 mA @ 14 Volts
- maximal voltage and current of signalization: 30 Volts, 1 Ampere
- measurement: +/-1%(not including sensor accuracy)
- measuring range: 0 to 9999 1/min)
- resolution: 1 digit
- operating: -20°C to 70°C (-4°F to 158°F) temperature range
- relative humidity: 95% without condensation
- load: +/-20 g
- vibration: 1 to 200 Hz
- weight: 250 grams (0,55 lbs)
- dimensions: 71x67x45 mm (2.795x2.637x1.771 inch)
- diameter hole: 57 mm (2 1/4")
- inputs for RPM sensors: three wire, pick-up with low or high voltage
- two status inputs of magnetos: LOW or HIGH (separate pole of switch reqired)
- internal speed sensor 20 to 350km/h (10 to 189 knots) for calculate flying time (version SAS)
- starter lock signal: grounded, max. 0.5 Amps (external relay required)
- communication line with a PC via standard RS-232c
Diesen Artikel haben wir am 11.08.2019 in unseren Katalog aufgenommen.